| |
Compatible Serial 4:2:2 Interface Module
DigiLinxTM is a DigiSuite and Movie-2 Bus compatible 4:2:2 interface
module. This high-end serial 4:2:2 I/O provides three 4:2:2 inputs and
two 4:2:2 outputs for main program and key signals. DigiLinx also provides
DigiSuite and Movie-2 Bus products with broadcast-quality genlock from
the external reference input. In addition, DigiLinx' key output can be
inverted, and in order to comply with 4:2:2 standards, sampling levels
can be mapped from 0-255 to 16-235.
Product
Features
- Three 10-bit 4:2:2 serial inputs with full-frame buffer
- One 10-bit 4:2: serial output for main program
- One 8-bit 4:2:2 serial output for key signal
- Infinite output timing adjustment
- Broadcast quality genlock to DigiSuite and other Movie-2 Bus products
- Automatic cable equalization

Technical Specifications
INPUT
- SIGNAL: 4:2:2 SMPTE 259M-C (270 Mbps)
- CABLE LENGTH: 250 m (850')
- RETURN LOSS: > 15 dB up to 270 MHz
- REF. IN: SMPTE 170M/PAL ITU 624-4 or 2 Vp-p/4 Vp-p composite sync
- RETURN LOSS: > 35 dB up to 5 MHz
OUTPUT
- SIGNAL: 4:2:2 SMPTE 259M-C (270 Mbps)
- RETURN LOSS: > 15 dB to 270 MHz
- KEY MODES: Direct, 4:2:2 mapped, invert
- JITTER (WIDEBAND): < 0.2 ui p-p
PROCESSING PERFORMANCE
- QUANTIZATION 10-bit signal path 10 bit Main/8-bit Key outputs
- INPUT TIMING: Full frame auto-timing
- OUTPUT PROCESSING DELAY: 3 to 75 µs
- FORM FACTOR: As per ISA standard
GENERAL
- POWER: 18 W
- I/O CONNECTOR: D-Sub 37 with six 75 Omega coax inserts
- CABLE: 2 m (6') with 75 Omega BNC (6)
|